The Mercury Air Horn Plenum Gasket, OEM reference 8046793, is an important intake sealing component used on selected Mercury Marine and Mercury Racing high-horsepower V6 outboards.
Designed to seal the mating surfaces of compatible air horn and intake plenum assemblies, this replacement gasket helps maintain proper intake airflow and prevents unwanted air leakage around the plenum connection.
Available through Buckshot Racing #77 Speed Store, the gasket supports maintenance and rebuilding of selected Mercury 3.0L EFI, 3.0L DFI Optimax, and 3.2L DFI performance engines.
Why the Plenum Gasket Matters
The intake plenum directs incoming air toward the engine's induction system. Its sealing surfaces must maintain an effective connection between the mating components.
A deteriorated, compressed, torn, or incorrectly installed gasket can allow unmetered air into portions of the intake system or create an air leak that affects normal engine operation.
Depending on the engine's fuel-management system and leak location, symptoms may include inconsistent idle, throttle-response problems, abnormal running characteristics, or reduced performance.
Not every intake-related running problem is caused by the plenum gasket. Fuel pressure, injectors, throttle-body condition, sensors, ignition, and other intake seals should also be evaluated during troubleshooting.
For high-performance outboards, maintaining a properly sealed intake assembly is an important part of reliable engine operation.
Mercury 3.0L & 3.2L Outboards
This air horn gasket family is associated with selected Mercury 200, 225, 250, and 300 HP V6 outboards, including conventional EFI and Direct Fuel Injection (DFI) applications.
Relevant performance engines include the Mercury Racing 300X 3.0L EFI, 250XS 3.0L DFI Optimax, and 300XS 3.2L DFI.
Additional Mercury 200–300 HP EFI, Optimax, and Pro XS applications may use related gasket versions, depending on the air-handler and intake configuration.
Mercury produced several revisions of these components, so fitment must be confirmed using the engine serial number and corresponding air-handler parts diagram.
Horsepower and displacement alone are not sufficient to guarantee compatibility.
Mercury OEM & Cross-References
Common references associated with this air horn plenum gasket family include 804679, 8046791, 8046792, 8046793, and 804679004.
Additional aftermarket references include 10-2708 and 516-31-01.
Mercury's updated 27-804679004 gasket supersedes 27-8046793 for applicable engine configurations.
Earlier references may represent different production revisions or application-specific gasket arrangements. They should not automatically be treated as universally interchangeable.
Before ordering, compare the existing gasket's shape, mounting-hole positions, sealing profile, and OEM parts listing.
Why Replace the Plenum Gasket?
The plenum gasket should be inspected whenever the air horn or associated intake assembly is removed.
Repeated heat cycles, age, compression, moisture exposure, and previous disassembly can affect gasket condition and sealing performance.
Signs that replacement may be necessary include visible tearing, damaged edges, permanent compression, material deterioration, or evidence of leakage around the mating surfaces.
Reusing a gasket that has been damaged during removal can compromise the seal after reassembly.
For engine rebuilds and intake-system maintenance, installing the correct replacement gasket is a straightforward preventive-maintenance measure.
Installation Recommendations
Before installation, remove the old gasket carefully and inspect both mating surfaces for damage, corrosion, distortion, or remaining gasket material.
Clean the surfaces using methods that will not damage the aluminum components or allow debris into the intake passages.
Verify that the replacement gasket matches the original air horn and plenum configuration.
Install the gasket in the correct orientation, ensuring the intake opening and mounting holes align without stretching or distortion.
Tighten mounting hardware evenly using the torque specifications and sequence required for the specific Mercury engine.
Do not apply silicone, adhesive, or additional sealant unless specifically directed by the applicable service instructions.
After reassembly, inspect surrounding hoses, sensors, electrical connectors, and throttle components before operating the engine.
Buckshot Racing #77 Builder Tech
Mercury's high-performance EFI and DFI engines rely on correctly functioning intake, fuel-delivery, ignition, and electronic control systems.
When diagnosing running problems, inspect the complete air-handler assembly rather than assuming that a replacement gasket alone will resolve the issue.
A proper intake seal contributes to consistent engine operation, but the overall condition of the throttle body, plenum, sensors, fuel system, and engine calibration remains equally important.
Whether you're maintaining a Mercury 300X EFI, rebuilding a 250XS Optimax, or servicing a 300XS DFI, choosing the right gasket helps protect the intake assembly's integrity.
The Mercury Air Horn Plenum Gasket is an essential replacement component for maintaining compatible Mercury Marine and Mercury Racing EFI/DFI intake systems.
Product Includes: One (1) Air Horn Plenum Gasket.


