top of page

Restore your Mercury Racing V6 powerhead with professional Nikasil-type cylinder repair and Nickel Silicon Carbide (NSC) replating services, available through Buckshot Racing #77 in cooperation with Millennium Technologies.


This specialized service restores worn, scored, damaged, or deteriorated plated cylinder bores using precision machining, advanced NSC coatings, and diamond honing.


Designed for demanding two-stroke performance applications, the process provides a durable, wear-resistant cylinder surface suited to properly engineered high-RPM racing engines.


Whether rebuilding a legendary Mercury 2.4L Bridgeport, 260 EFI, 280 ROS, 300 Drag, or Formula One powerhead, accurate cylinder geometry, ring compatibility, and piston-to-wall clearance are essential.


Mercury Racing V6 Applications


Cylinder plating and restoration services are available for evaluation on selected Mercury Racing 2.4L and 2.5L V6 outboards, including Mercury F1H2O, Formula One, S3000, 300 Drag, 280 ROS, 260 EFI, 245 HP Carb, and 2.4L Bridgeport engines.


These performance platforms have powered competitive tunnel boats, drag racing programs, offshore applications, and high-performance recreational boats for decades.


Other Mercury V6 configurations may qualify depending on cylinder construction, existing damage, previous repairs, and the intended final bore specifications.


What Is Nikasil Cylinder Plating?


Nikasil is a widely recognized name for nickel silicon carbide cylinder coatings used in high-performance engines.


The coating combines a nickel matrix with extremely hard silicon carbide particles, creating a durable cylinder running surface.


Millennium Technologies uses its proprietary Nickel Silicon Carbide (NSC) plating process, which provides a similar type of wear-resistant cylinder surface.


On suitable aluminum cylinder bores, this technology offers excellent wear resistance, effective heat transfer, and precise finishing capabilities.


These characteristics make NSC plating particularly attractive for high-performance Mercury Racing engines operating under demanding heat, RPM, and cylinder-loading conditions.


Nikasil® is a registered trademark of MAHLE. Millennium's NSC plating is an independently developed coating process.


Why Replate a Mercury Race Block?


Over time, high-performance two-stroke cylinder bores can develop scoring, plating damage, corrosion, ring wear, or surface deterioration.


Common causes include overheating, lubrication problems, piston damage, foreign material, improper clearances, and prolonged operation under demanding conditions.


Simply installing new pistons and rings will not correct damaged plating or cylinders that have exceeded acceptable dimensional limits.


Professional NSC restoration can return suitable cylinders to specified dimensions and surface-finish requirements.


Potential benefits include improved wear resistance, restored cylinder geometry, better ring-sealing conditions, and a foundation for reliable engine assembly.


Actual results depend on the complete engine combination. Replating alone does not guarantee increased horsepower or extended engine life.


Professional NSC Restoration


Every submitted Mercury Racing block must be evaluated before a repair procedure is approved.


Inspection considers cylinder scoring, original plating condition, corrosion, port edges, previous machining, bore measurements, and structural integrity.


Approved blocks are prepared through the applicable machining and surface-treatment procedures before receiving Millennium Technologies' specialized NSC plating.


Following plating, precision diamond honing establishes the specified cylinder dimensions, surface finish, and the optimal bore sizing.


Final dimensional verification is critical to achieving appropriate piston-to-wall clearance, bore geometry, and ring compatibility.


Severely damaged castings, compromised port bridges, cracked cylinders, or previously modified sleeve arrangements may require additional repairs or may not qualify for plating.


Nikasil-Type Plating vs. Steel Sleeves


Mercury Racing V6 engines have been produced and rebuilt using both plated-aluminum cylinder construction and conventional steel sleeves.


Properly plated aluminum cylinders provide excellent wear characteristics and efficient heat transfer without the thermal interface associated with a separate iron sleeve.


Steel sleeves remain a practical repair alternative for many engines because they can be honed, bored, or replaced.


Contact Mike Hill at +1-714-697-1716 for tech support.


However, the ideal repair depends on the engine's original construction, intended performance level, existing sleeve arrangement, and piston package.


Not every steel-sleeve block is suitable for conversion to plated-aluminum cylinders. Each application requires evaluation.


Piston, Ring & Bore Compatibility


Mercury Racing engine builders understand that cylinder plating is only one part of a successful powerhead rebuild.


Piston material, skirt design, coatings, ring composition, cylinder finish, and operating temperature must work together.


Piston rings intended for steel sleeves are not necessarily compatible with nickel silicon carbide surfaces.


Before final honing, the correct piston specifications and required operating clearances must be established.


Proper port-edge preparation, ring end gaps, cooling-system condition, fuel delivery, ignition timing, and engine break-in also remain essential.


How to Order Your Plating Service


Step 1 — Contact Mike Hill

Call Buckshot Racing #77 at +1-714-697-1716 or email mike@buckshotracing77.com before shipping your engine block.


Provide your Mercury engine model, displacement, approximate year, bore size if known, and a description of the damage or intended performance build.


Step 2 — Review the Engine


Mike will discuss your project and help coordinate the appropriate inspection and restoration requirements.


Photographs of the cylinders, damaged areas, and block identification markings are helpful. Disclose previous sleeving, welding, machining, or plating repairs.


Step 3 — Confirm Service & Shipping


Once the preliminary requirements are established, receive shipping instructions and service-order information.


The block should be disassembled, drained, and securely packaged according to the approved instructions. Do not ship an assembled powerhead unless specifically authorized.


Step 4 — Inspection, Plating & Return


Following physical inspection and approval, the block is processed through the appropriate restoration procedures.


Final pricing, repairability, bore specifications, turnaround time, and return shipping are established through the service-order process.


From the Mercury 2.4L Bridgeport and 245 Carb to the 260 EFI, 280 ROS, S3000, 300 Drag, and F1H2O racing engines, these legendary V6 powerheads deserve precision cylinder restoration.


Buckshot Racing #77 offers a convenient point of contact for professional NSC cylinder plating and restoration through Millennium Technologies.


Contact Mike Hill at +1-714-697-1716 for tech support.

Nikasil Cylinder Repair & NSC Block Plating, Mercury Racing V6

SKU: Nikasil-77
$1,995.00Price
Quantity
    bottom of page