If you’re tired of old breaker bars and 1/2" impacts that chatter your gears when you’re removing a high-performance propeller, the Shorty Billet Prop Wrench from Buckshot Racing #77 is built for the way performance boaters actually work.
 
This compact 1-1/16" propeller nut wrench gives you a clean, controlled way to loosen and tighten prop nuts without the awkward length, slipping, and knuckle damage that comes with bulky tools.
 
Precision CNC machined from 6061 billet aluminum, then glass-bead blasted and anodized blue, it’s a tough, race-ready wrench that belongs in your boat, truck, or race trailer.
 
Why the “shorty” design works so well
High-performance gearcases and prop hardware deserve better than impact-gun chatter. Impacts can shock-load the drivetrain, and a long breaker bar can slip, slam, and round hardware if the fit isn’t perfect.
 
The Buckshot Racing #77 Shorty Billet Prop Wrench is designed for controlled leverage and a secure fit, helping protect your gear set, your propshaft hardware, and your hands.
 
The safe “fist bump” method for breaking the nut loose
One of the best advantages of a short, solid prop wrench is how easily it works with simple, controlled force. With the wrench seated fully on the 1-1/16" prop nut, you can apply steady hand pressure—then, if needed, give the handle end a few firm fist bumps to break the nut loose.
 
Those quick, controlled strikes help overcome the initial “stiction” without the violent hammering, bouncing, and gear chatter you can get from an impact gun. Because you’re hitting the wrench and not spinning the drivetrain aggressively, it’s a cleaner, more predictable way to loosen a stubborn prop nut—especially at the ramp or in the pits.
 
Built for 1-1/16" prop nuts and square drain plugs
This wrench is sized for 1-1/16" propeller nuts, a common size on many performance outboards and sterndrive setups. It also doubles as a tool for square lower-unit drain plugs, making it a practical addition for routine gearcase service.
 
CNC machined from 6061 billet, glass-beaded, and anodized blue
The Buckshot Racing #77 Shorty Billet Prop Wrench is precision CNC-machined from 6061 aluminum for strength and corrosion resistance in marine environments. After machining, it’s glass-bead blasted for a clean finish and then anodized blue for long-term durability and a race-ready look.
 
Fitment: Outboard brands and motors that commonly use 1-1/16" prop nuts
The Buckshot Racing #77 Shorty Billet Prop Wrench is built for 1-1/16" propeller nuts, a very common prop nut size used across many performance and recreational outboards,  including Mercury Marine, Mercury Racing, Mariner, Yamaha, OMC, Johnson, Evinrude, Suzuki, Honda, and Tohatsu, Nissan—especially on mid-range to larger horsepower outboards where a robust prop nut is required. Check your specs for 100% fittment. 
 
Contact Mike Hill at +1-714-697-1716 or email mike@buckshotracing77.com for technical support.